Tasks

Kubernetes v1.13 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.

Edit This Page

Horizontal Pod Autoscaler

The Horizontal Pod Autoscaler automatically scales the number of pods in a replication controller, deployment or replica set based on observed CPU utilization (or, with custom metrics support, on some other application-provided metrics). Note that Horizontal Pod Autoscaling does not apply to objects that can’t be scaled, for example, DaemonSets.

The Horizontal Pod Autoscaler is implemented as a Kubernetes API resource and a controller. The resource determines the behavior of the controller. The controller periodically adjusts the number of replicas in a replication controller or deployment to match the observed average CPU utilization to the target specified by user.

How does the Horizontal Pod Autoscaler work?

Horizontal Pod Autoscaler diagram

The Horizontal Pod Autoscaler is implemented as a control loop, with a period controlled by the controller manager’s --horizontal-pod-autoscaler-sync-period flag (with a default value of 15 seconds).

During each period, the controller manager queries the resource utilization against the metrics specified in each HorizontalPodAutoscaler definition. The controller manager obtains the metrics from either the resource metrics API (for per-pod resource metrics), or the custom metrics API (for all other metrics).

Please note that if some of the pod’s containers do not have the relevant resource request set, CPU utilization for the pod will not be defined and the autoscaler will not take any action for that metric. See the algorithm details section below for more information about how the autoscaling algorithm works.

The HorizontalPodAutoscaler normally fetches metrics from a series of aggregated APIs (metrics.k8s.io, custom.metrics.k8s.io, and external.metrics.k8s.io). The metrics.k8s.io API is usually provided by metrics-server, which needs to be launched separately. See metrics-server for instructions. The HorizontalPodAutoscaler can also fetch metrics directly from Heapster.

Note:
FEATURE STATE: Kubernetes 1.11 deprecated
This feature is deprecated. For more information on this state, see the Kubernetes Deprecation Policy.

Fetching metrics from Heapster is deprecated as of Kubernetes 1.11.

See Support for metrics APIs for more details.

The autoscaler accesses corresponding scalable controllers (such as replication controllers, deployments, and replica sets) by using the scale sub-resource. Scale is an interface that allows you to dynamically set the number of replicas and examine each of their current states. More details on scale sub-resource can be found here.

Algorithm Details

From the most basic perspective, the Horizontal Pod Autoscaler controller operates on the ratio between desired metric value and current metric value:

desiredReplicas = ceil[currentReplicas * ( currentMetricValue / desiredMetricValue )]

For example, if the current metric value is 200m, and the desired value is 100m, the number of replicas will be doubled, since 200.0 / 100.0 == 2.0 If the current value is instead 50m, we’ll halve the number of replicas, since 50.0 / 100.0 == 0.5. We’ll skip scaling if the ratio is sufficiently close to 1.0 (within a globally-configurable tolerance, from the --horizontal-pod-autoscaler-tolerance flag, which defaults to 0.1).

When a targetAverageValue or targetAverageUtilization is specified, the currentMetricValue is computed by taking the average of the given metric across all Pods in the HorizontalPodAutoscaler’s scale target. Before checking the tolerance and deciding on the final values, we take pod readiness and missing metrics into consideration, however.

All Pods with a deletion timestamp set (i.e. Pods in the process of being shut down) and all failed Pods are discarded.

If a particular Pod is missing metrics, it is set aside for later; Pods with missing metrics will be used to adjust the final scaling amount.

When scaling on CPU, if any pod has yet to become ready (i.e. it’s still initializing) or the most recent metric point for the pod was before it became ready, that pod is set aside as well.

Due to technical constraints, the HorizontalPodAutoscaler controller cannot exactly determine the first time a pod becomes ready when determining whether to set aside certain CPU metrics. Instead, it considers a Pod “not yet ready” if it’s unready and transitioned to unready within a short, configurable window of time since it started. This value is configured with the --horizontal-pod-autoscaler-initial-readiness-delay flag, and its default is 30 seconds. Once a pod has become ready, it considers any transition to ready to be the first if it occurred within a longer, configurable time since it started. This value is configured with the --horizontal-pod-autoscaler-cpu-initialization-period flag, and its default is 5 minutes.

The currentMetricValue / desiredMetricValue base scale ratio is then calculated using the remaining pods not set aside or discarded from above.

If there were any missing metrics, we recompute the average more conservatively, assuming those pods were consuming 100% of the desired value in case of a scale down, and 0% in case of a scale up. This dampens the magnitude of any potential scale.

Furthermore, if any not-yet-ready pods were present, and we would have scaled up without factoring in missing metrics or not-yet-ready pods, we conservatively assume the not-yet-ready pods are consuming 0% of the desired metric, further dampening the magnitude of a scale up.

After factoring in the not-yet-ready pods and missing metrics, we recalculate the usage ratio. If the new ratio reverses the scale direction, or is within the tolerance, we skip scaling. Otherwise, we use the new ratio to scale.

Note that the original value for the average utilization is reported back via the HorizontalPodAutoscaler status, without factoring in the not-yet-ready pods or missing metrics, even when the new usage ratio is used.

If multiple metrics are specified in a HorizontalPodAutoscaler, this calculation is done for each metric, and then the largest of the desired replica counts is chosen. If any of those metrics cannot be converted into a desired replica count (e.g. due to an error fetching the metrics from the metrics APIs), scaling is skipped.

Finally, just before HPA scales the target, the scale recommendation is recorded. The controller considers all recommendations within a configurable window choosing the highest recommendation from within that window. This value can be configured using the --horizontal-pod-autoscaler-downscale-stabilization-window flag, which defaults to 5 minutes. This means that scaledowns will occur gradually, smoothing out the impact of rapidly fluctuating metric values.

API Object

The Horizontal Pod Autoscaler is an API resource in the Kubernetes autoscaling API group. The current stable version, which only includes support for CPU autoscaling, can be found in the autoscaling/v1 API version.

The beta version, which includes support for scaling on memory and custom metrics, can be found in autoscaling/v2beta2. The new fields introduced in autoscaling/v2beta2 are preserved as annotations when working with autoscaling/v1.

More details about the API object can be found at HorizontalPodAutoscaler Object.

Support for Horizontal Pod Autoscaler in kubectl

Horizontal Pod Autoscaler, like every API resource, is supported in a standard way by kubectl. We can create a new autoscaler using kubectl create command. We can list autoscalers by kubectl get hpa and get detailed description by kubectl describe hpa. Finally, we can delete an autoscaler using kubectl delete hpa.

In addition, there is a special kubectl autoscale command for easy creation of a Horizontal Pod Autoscaler. For instance, executing kubectl autoscale rs foo --min=2 --max=5 --cpu-percent=80 will create an autoscaler for replication set foo, with target CPU utilization set to 80% and the number of replicas between 2 and 5. The detailed documentation of kubectl autoscale can be found here.

Autoscaling during rolling update

Currently in Kubernetes, it is possible to perform a rolling update by managing replication controllers directly, or by using the deployment object, which manages the underlying replica sets for you. Horizontal Pod Autoscaler only supports the latter approach: the Horizontal Pod Autoscaler is bound to the deployment object, it sets the size for the deployment object, and the deployment is responsible for setting sizes of underlying replica sets.

Horizontal Pod Autoscaler does not work with rolling update using direct manipulation of replication controllers, i.e. you cannot bind a Horizontal Pod Autoscaler to a replication controller and do rolling update (e.g. using kubectl rolling-update). The reason this doesn’t work is that when rolling update creates a new replication controller, the Horizontal Pod Autoscaler will not be bound to the new replication controller.

Support for cooldown/delay

When managing the scale of a group of replicas using the Horizontal Pod Autoscaler, it is possible that the number of replicas keeps fluctuating frequently due to the dynamic nature of the metrics evaluated. This is sometimes referred to as thrashing.

Starting from v1.6, a cluster operator can mitigate this problem by tuning the global HPA settings exposed as flags for the kube-controller-manager component:

Starting from v1.12, a new algorithmic update removes the need for the upscale delay.

Note: When tuning these parameter values, a cluster operator should be aware of the possible consequences. If the delay (cooldown) value is set too long, there could be complaints that the Horizontal Pod Autoscaler is not responsive to workload changes. However, if the delay value is set too short, the scale of the replicas set may keep thrashing as usual.

Support for multiple metrics

Kubernetes 1.6 adds support for scaling based on multiple metrics. You can use the autoscaling/v2beta2 API version to specify multiple metrics for the Horizontal Pod Autoscaler to scale on. Then, the Horizontal Pod Autoscaler controller will evaluate each metric, and propose a new scale based on that metric. The largest of the proposed scales will be used as the new scale.

Support for custom metrics

Note: Kubernetes 1.2 added alpha support for scaling based on application-specific metrics using special annotations. Support for these annotations was removed in Kubernetes 1.6 in favor of the new autoscaling API. While the old method for collecting custom metrics is still available, these metrics will not be available for use by the Horizontal Pod Autoscaler, and the former annotations for specifying which custom metrics to scale on are no longer honored by the Horizontal Pod Autoscaler controller.

Kubernetes 1.6 adds support for making use of custom metrics in the Horizontal Pod Autoscaler. You can add custom metrics for the Horizontal Pod Autoscaler to use in the autoscaling/v2beta2 API. Kubernetes then queries the new custom metrics API to fetch the values of the appropriate custom metrics.

See Support for metrics APIs for the requirements.

Support for metrics APIs

By default, the HorizontalPodAutoscaler controller retrieves metrics from a series of APIs. In order for it to access these APIs, cluster administrators must ensure that:

What's next

Feedback